Home

Specialists in Engine and Powertrain development.

www.facebook.com/dmfperformanceparts

Dubai 24hr Endurance race is one of the most highly regarded in the world. Our DMF POWERED K20 RACE ENGINE Finished the Race and placed 6th. This engine has an incredible 48 hrs+ duty cycle on the circuit and is still racing!!!!

Our engine placed 6th and has 48 hours of racing duty cycle...

Thomas Raldorf Owner and one of the Racing Drivers of the Dubai endurance DC5 Above gives Testament to DMF PERFORMANCE Endurance Honda Engine

"I have raced K20 engines for the last 4 years and have tried everything thing I can think of in regards to parts and custom made parts to get the power, and they engines have been good over the years, but just not outstanding......the DMf engine, was out of the box 5% more power then mine, and this was even as an enduranec speec engine.....so I would assume that your sprint race engines would be quite a bit more powerful .....

I normally run my race engines to 9200 but have the ECu limit set at 9500 for the races, just in case its required at one point in the race.

I was very impressed bu the torque and the general power curve of the engine, and specially the durability.....not a single peep in 24 hours from the engine....I mean not a single one at all......nothing to be worried about and it pulled as good from the start as it did in the end of the race....
A testament to the workmanship you do with the engines...!!!

Thomas Raldorf"

We can take your engine to the limits of modern Performance.

Honda Engine Specialist.

Evo Engine Specialist.

Toyota Supra Specialist.

Subaru Engine Specialist.

Our facilities and capabilities include;

Engine blue printing and building.

Engine build cleanroom.

New Resurfacing equipment for skimming and facing/decking cylinder heads and blocks on a state of the art surfacing machine, using supra abrasive PCD, CBN and Segmented Grinding Stones.

Precision Engine block boring

High Performance Milling projects

Precison measuring equipment to properly blue print engines and ensure correct tolerances.

Laser alignment and geometry adjustments for fast road and race setup.

Highly equipped general garage and workshop facilities with state of the art snapon and other world leading tools.

Digital Bore Scopes with photo and film capability. (Digital files for documentation can be emailed)

ECU fault code reading.

General Fault Diagnosis

AFR Ratio Analysis

Dedicated engine strip down and degreasing areas away from main work shop.

Blast cabinet for Shot peening and restoring surfaces.

Japanese Performance Parts and Engine Distributor.

Official Distributor for BRIAN CROWER performance engine and race components.

DISTRIBUTOR and Suppliers for BRIAN CROWER, SKUNK2 RACING, CP Pistons, Carrillo, ACL Bearings, ARP Fasteners, Cometic Gaskets and supplier of Race proven Japanese Performance Engine components and Race Engines.

For those that demand more torque, more power and engine performance to match, we offer the mighty 2.5L K-series engine swap into your DC5 or EP3. Below a fully forged engine blueprinted to ultra stringent tolerances. Ported, Polished big valves. Circa naturally aspirated 300bhp 220ft lbs with Plenum. 330bhp and 230 ft lbs with ITB's. Call or email your exact engine requirements.

OUR TYPE R Engine claiming 1st position at Brands Hatch Indy Circuit in the MSA Nippon challenge. Engine had 100% reliability @ 9000rpm all season. 13 Race's in Total.

303bhp N/A Honda Powered CivicType R, Claiming 1st Position in the 300bhp class Nippon at Mallory Park
Danish super saloon series driven by racer Jakob Borum 300bhp N/A POWERPLANT WITH ITB'S, LEADING the PACK AHEAD OF 400BHP BMW POWER.

Below 550bhp 2.65L Supercharged Methanol injected Civic Type R. (Customised Gearing 200mph)
We can supply bespoke engine comissions or Forged Type R Race Engines off the Shelf. These range range from 2.0L, 2.1L 2.2L, 2.35L, 2.65L and some have 9500rpm Greater than Touring Car Spec Engines waiting for you now.
Below our Integra DC5 with state of the art 9500rpm Race Engine.
We have a fully equipped workshop for building, fitting, tuning and setting up engine, transmission, suspension, braking systems, chassis and electronics.
Full Engine, Gearbox and Drivetrain rebuilds to stock, Fast road or Full Competition Spec.
Trackday/Competition Preparation.
Full Competition race car conversions.
Aftermarket and OEM Parts Supply.
Full Fluid Servicing from £155
Bespoke In-house Parts Manufacturing and Fabrication.
Suspension, Brakes and Chasssis Upgrades.
Engine Management System Upgrades and ECU mapping.
DMF POWERED Forged Type R (K20a) Engine Driven by Dixon Cheng in the MSA Nippon Challenge.
Honda Type-R Engine sponsor of Sinclaire Motorsport Racing Lotus. 1st position Below and overall winner of the Elise Trophy 2008.

ENGINE PARTS EUROPE, The Official UK Distributor for Brian Crower Engine performance components for Japanese Cars. We specialise in forged engines and components for Japanese vehicles. The company was established by a professional Scientist who discovered a niche market for high quality, high performance affordable tuning parts and components for Japanese performance cars.
  ENGINE PARTS EUROPE  offer the very best deals on quality forged engine builds and commissions using only the very best mechanics and engineers in the business to give you the best powerplant available for your funds. We are interlinked with several of the top tuning houses in the UK giving you, the customer the very best deals and serive available.
Brian Crower Inc. We are proud to be the official UK distributor for Brian Crower performance engine parts. BC performance engine parts are available for Honda, Mitshibishi, Nissan, Subaru, and Toyota. We can supply Stroker Kits, Pistons, Billet and Forged Cranks, Cams, Springs and Retainers, Valves and customised parts on request.
Carrillo Industries was founded by Fred Carrillo in 1963. Fred approached the challenges of manufacturing with the idea of no compromise. He knew the never ending quest for speed would require the same desire in component manufacturing. This Carrillo philosophy is as evident today as it was at Carrillo’s conception in 1963.
CP Pistons was created to service the needs of those with the desire to build engines of the highest quality and technology. With the use of proprietary tooling, dedicated cutters and unique fixtures, our state-of-the-art equipment produces superior pistons that will not compromise your expectations. Each piston is engineered using sophisticated computer modeling for optimum designs, while our 5-axis machining capability enables us to create any piston for any application.

SKUNK2 Racing. We are proud to be an official UK distributor for Skunk 2 Racing performance engine parts. Skunk2 Offer Engine Modifications such as Valvetrain and engine components for Honda and Mitshubishi Lancer Evo. Skunk 2 Racing has earned its reputation by success on the race circuit. They are a world class engineering company at the cutting edge of automotive racing technology. Since 1995 Skunk have been developing and innovating high performance engine parts.
Race Series Performance Bearings

Track proven to provide optimum performance, endurance and durability essential for higher RPM engines.
A distinguished pedigree and track record. Race Series performance bearings and gaskets are products of more than a half-century of ACL bearing design, engineering, metallurgy and manufacturing experience. They are used extensively in the US. and Canada and are the overwhelming choice of racers and engine builders worldwide. ACL's experience includes designing and manufacturing bearings, gaskets and other car and truck engine components for GM, Ford, Toyota and Mitsubishi.

Manufacturers of aftermarket high performance products including ECU's, brakes, cam gears, cold-air intake systems, air filters, and fuel system products.
ARP – The Fasteners of Champions

Today, ARP’s product line contains of thousands of part numbers, and has expanded to include virtually every fastener found in an engine and driveline. These range from quality high performance OEM replacement parts to exotic specialty hardware for Formula 1, IndyCar, NASCAR and NHRA drag racing.
RC Engineering is the world's leading supplier of made-to-order, high-performance, electronic fuel injectors. RC injectors are available for a wide range of automotive, motorcycle and marine engines used in high-performance or racing applications.
Cometic Gasket, Inc. has grown into a leading worldwide supplier of custom and short-run gaskets for the motorsports industry.
Supplier of Race Proven Performance Camshafts for Honda, Mitshubushi, Nissan, Subaru and Toyota.
Call for your specific application.

Follow the Performance on Facebook with a Like