Tools Specialist

Place the punch on your work and press. The spring loaded handle 'hammers' your punch mark for you. (Letters 4mm tall by 3.5mm wide) 

Now you can safety wire or pin any critical bolt quickly, easily. This inexpensive drill guide provides you the capability to drill any bolt size with a choice of two different size holes. Simply screw the desired size bolt into the block until the  

Deliver the perfect blow without the risk of damaging expensive or irreplaceable components. Perfectly weighted with a narrow head to reach into awkward spaces. 

Perfect for onboard. Put the force where you want it with this 2kg shot filled rubber hammer. Lead shot inside the head shifts to create a solid driving no bounce impact. Soft face will not mark. 

Removes burrs from the edges of holes, tubes and straight edges. Swivel blade ensures correct cutting angle at all times. Comes fitted with a blade for steel and aluminium. 

Keep your boat tidy with a compact and cost effective tool roll. Heavy duty water resistant canvas. (16 Pockets - Measures 600mm x 300mm) 

Finger Nails are just never good enough. Remove O Rings, cotter pins, seals (Straight Hook, Hook Pick, 90 Deg Hook & O-Ring Hook) 

Without regular maintenance cables will seize. Throttle & engine stop cables etc, all need lubrication. This hydraulic cable oiler forces oil between inner and outer cables throughout their entire length leaving them silky smooth. Accepts most pop 

0.8mm Stainless Steel Locking Wire (0.5kg Spool) 

As T208 (5 Meters) 

Ever dropped that nut? This super strong magnet will pick up a 7lb lump hammer. Electrically insulated so can be ued by electritions to retrieve out of reach items. 

Prepare nuts and bolts for locking wire. Drill through adjacent faces of Hexagonal head (1/16 drill) making a safety wire hole. 

Frustrated? To remove corroded or damaged nuts without damaging the thread, the last resort is the nut splitter. The hardened steel cutting tip is driven into the side so that it drops off. 

Hold a hacksaw blade with precision and comfort. Get into places where a frame will not allow. Use as a jig, keyhole or hacksaw. 

B.S.W Tap and Die Set – 24pce, 1/8in. to 1/2in. B.S.W tap pairs and dies with tap holder and die stock. 

U.N.C. Tap and Die Set – 17pce, 1/4in. to 1/2in. U.N.C tap pairs and dies with tap holder and die stock. 

U.N.F. Tap and Die Set – 17pce, 1/4in. to 1/2in. U.N.F tap pairs and dies with tap holder and die stock. 

B.S.F Tap and Die Set – 21pce, 3/16in. to 1/2in. B.S.F tap pairs and dies with tap holder and die stock. 

Virtually indestructable and silent. These toothless ratchets respond to the smallest of movements making them useable in the tightest of spots. Will not become worn or loose like conventional ratchets. 

Micrometer adjustment torque wrench has 1/2 square drive and a range 40-210Nm. 

Wire Locking is the standard means of securing critical nut and bolt assemblies. These 9 Wire Twisting Pliers provide the only means of twisting wire evenly without strain or breakage. To prepare nuts or bolts for wire locking, drill through the adj